Tamper-Evident Seals for Pharmaceuticals
Does every pack show at a glance whether it has already been opened – even at full line speed?
A seal is quickly applied. Making sure it sits on every single pack, is positioned correctly, adheres cleanly and does not cover any mandatory information is a different task. That is exactly what decides whether your tamper-evident seal delivers in practice what it promises.
INTREX develops labeling systems for tamper-evident seal labels and checks the result directly in the line. Validatable, audit-ready and fully documented. Custom-engineered instead of off-the-shelf.

Why is a tamper-evident seal more than just a label?
It is well known that counterfeit medicines do not only enter circulation through dubious online shops. Attempts are also made in the legal supply chain to open original packs, swap the contents and close the pack again. The tamper-evident seal makes exactly that visible: anyone who opens the pack leaves a trace that cannot be removed unnoticed.
For pharmaceutical manufacturers, this means the protection must work reliably on every pack. A missing, misaligned or poorly adhering seal may only be noticed at the pharmacy.
Then delivery capability, audit readiness and trust in your product are at stake.
What does a tamper-evident seal mean for medicinal products?
The tamper-evident seal – technically known as tamper evidence or an "anti-tampering device" – is one of two safety features that the EU Falsified Medicines Directive 2011/62/EU requires for prescription medicinal products. The second is the unique identifier, usually a 2D Data Matrix code containing product code, serial number, batch and expiry date.
The two features complement each other: the code proves that the pack is genuine. The tamper-evident seal shows that it has not been opened since leaving the manufacturer. Only together do they allow verification before dispensing to patients.
The details on the safety features, their scope and the exemptions are laid down in Commission Delegated Regulation (EU) 2016/161. You can find the full text on the official legal portal of the European Union.
To the regulation text on EUR-Lex
What types of tamper-evident seals are there?
The principle is always the same: opening leaves visible damage that cannot be reversed. In practice there are different ways to achieve this:
Seal and closure labels
They are applied over the opening flap or the edge of the folding carton – in L-shape over a corner or in U-shape over two sides. When the pack is opened, the label tears or leaves visible traces.
Glued flaps
The folding carton is glued so that it can only be opened by damaging it.
Perforations and tear-off tabs
A predetermined breaking point in the folding carton tears open the first time the pack is opened.
Seal labels have a practical advantage: they can be integrated into existing lines without changing the packaging material itself. Transparent labels also keep the print and code underneath legible.
What matters for tamper-evident seals in the line?
The requirements sound simple but have pitfalls in practice:
- Position: The seal must truly bridge the opening – a few millimeters of offset can cancel the protective effect.
- Adhesion: Wrinkles, bubbles or lifting edges make the label vulnerable.
- Legibility: The seal must neither cover nor render unreadable the Data Matrix code or mandatory information.
- Completeness: Every pack needs its seal – not just the random sample.
- Speed: Labeling must keep up with line output without losing precision.
- Evidence: In an audit, what counts is what is documented.
Random checks at the end of a shift reveal errors too late. By then, rejects have already been produced, and the goods may already be packed. Tamper-evident sealing only becomes process-reliable when every seal is applied and checked directly in the line.
Where does INTREX come in with tamper-evident seals – and where not?
We say it openly: INTREX does not supply serialization software, does not assign serial numbers and does not connect your line to verification systems such as securPharm. These tasks lie with you and your IT and serialization partners.
- Serialization software
- Serial number assignment
- securPharm connection
Our focus is the physical, optical level of the line: applying the seal label precisely, checking the result and documenting everything without gaps.
- Applying
- Checking
- Documenting
The tamper-evident seal is one of three service pillars with which we support pharmaceutical manufacturers in serialization – alongside code inspection and labeling and printing.
Which solutions does INTREX offer for tamper-evident seals?
How does the seal label get onto the pack precisely?
With the INTREX SET 2933 labeling system you apply seal labels and tapes in L or U shape over corners and edges – on folding cartons as well as on bottles. The system works at up to 400 units per minute, and the labeling speed can be adapted to the line output. Format changes are quick and easy, and placement is precise and repeatable.
For transparent seal labels, an ultrasonic sensor is available in addition to the optical label sensor. Depending on the application, the system processes label widths of up to 90, 160 or 220 mm. More on tamper-evident labeling.
How is it checked that every seal sits correctly?
Applied is not yet checked. Our inline inspection checks labels and print image directly in the line: Is the label present, complete and correctly positioned? Faulty packs are detected before they leave the line.
How do tamper-evident seals and code inspection work together?
The seal and the Data Matrix code are often close together on the pack. That is why we design labeling and code inspection together. Our vision systems read 1D and 2D codes inline – so you can see whether the code is still legible after the seal has been applied. This interplay is part of our services around pharma serialization.
Are the systems validatable?
Yes. We develop according to the principles of EU GMP and GAMP 5 and supply the qualification documentation for DQ, IQ, OQ and PQ. With the KUPvision software, inspection results are evaluated centrally and logged without gaps. This way you can prove in an audit that every pack has received its tamper-evident seal.
What if the standard system does not fit?
Then we build one that does. Unusual pack formats, tight space conditions or integration into an existing line are solved through our special-purpose machine building.
How does a project with INTREX work?
Capture requirements
We analyze the pack, the seal label, the code position and your existing line.
Develop the concept
We design labeling and inspection as one coherent system.
Build and integrate
We manufacture the system and commission it in your line.
Qualify and support
We support qualification with complete documentation and remain your contact throughout the entire life cycle.
What do you gain with a verified tamper-evident seal?
Process reliability
Every pack receives its seal – and every seal is checked.
Less scrap and rework
Errors are detected where they occur.
Audit readiness
Gapless records prove correct execution.
Delivery capability
Your goods reach wholesalers and pharmacies without complaints about the seal.
One point of contact
Labeling, inspection and documentation from a single source.
Frequently asked questions about tamper-evident seals for medicinal products
What is a tamper-evident seal?
A tamper-evident seal is a device on the medicine pack that is visibly damaged when the pack is first opened. This makes it possible to see whether a pack has already been opened and possibly tampered with.
Which medicinal products need a tamper-evident seal?
In principle, prescription medicinal products. Which products are covered or exempt in detail is regulated by Commission Delegated Regulation (EU) 2016/161.
What is the difference between a tamper-evident seal and serialization?
Serialization gives each pack an individual code that proves its authenticity. The tamper-evident seal shows whether the pack has been opened. The two safety features complement each other.
What do L-shape and U-shape mean for seal labels?
An L-label is applied over one corner of the pack, a U-label over one edge onto two opposite sides. Which shape fits depends on the pack and the opening mechanism.
Can tamper-evident labeling be integrated into an existing line?
Yes. The INTREX SET 2933 is configured for the respective application and can be integrated into existing lines. We clarify the exact effort during requirements capture.
How do you start your tamper-evident seal project?
You want to be sure that every pack carries its seal – in the right place and verifiably?
Then let's talk about your line. Tell us about your pack, label and line output. We will show you how your tamper-evident seal can be implemented reliably and in a validatable way.